Kauppa

ETS-sovelluksella Device Compare (Laitevertailu) voit vertailla asennuksen yksittäistä laitetta vastaavassa ETS-projektissa saatavilla oleviin tietoihin. Tällä tavoin asennuksen nykyistä tilaa voidaan verrata ETS-projektin odotettuun tilaan. Laitteen konfiguraation poikkeavuudet näytetään, ja tulosta voidaan käyttää myös todisteena siinä tapauksessa, että kolmas osapuoli on tehnyt luvatta muutoksia asennukseen.

ETS-sovelluksella Replace Device (Vaihda laite) voit vaihtaa KNX-laitteita niiden ryhmäosoitteet säilyttäen. Tämä on mahdollista laitteilla, joilla on samanlaiset toiminnot, valmistajasta riippumatta.

ETS-sovellusta Device Reader (Laitelukija) voidaan käyttää laitteiden muistin ja ominaisuuksien lukemiseen, jolloin käyttäjä saa ratkaisevan tärkeitä ja mahdollisesti selventäviä tietoja. Nämä tiedot voidaan myös tallentaa tiedostona.
Videoesitys (EN)

With the “KNXMCM BAline Studio Exchange” ETS app, CSV files that were previously generated in BAline Studio can be imported to ETS. These files contain information about names and types of objects and the direction of data flow, which were set in BAline Studio projects.

With “KNXMCM BAline Studio Exchange” the settings on KNX devices can be easily made so that the corresponding BAline Studio Project can run perfectly on these devices.

“KNXMCM BAline Studio Exchange” can in each case be run for only one device.

If a receiver heartbeat was set up for group objects in BAline Studio, a message appears in the “Information” field.

The KNX RF Field Strength Analyzer (KNX-RF-FSA) app is taking the innate uncertainty of KNX RF installations. By gathering the Received Signal Strength Indicators (RSSI) of all user-selected RF devices and displaying them in a colour-coded matrix, the KNX-RF-FSA makes testing and debugging of KNX RF device connections easier than ever before. Designed to be used for short and long-term observations of the device’s RSSIs, the KNX-RF-FSA is a high-quality tool that can highlight any weaknesses in a KNX RF installation. This tool also tests the functionality of activated repeater for increased area coverage to avoid future problems. The RF FSA is all you need for successfully commissioning your KNX RF installation. Available in MyKNX.

This App is needed for configuration of the ABB SUG/U 1.1 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All SUG/U 1.1 in the project can be processed at the same time. The download into the device is done by normal ETS download.

Easy2ETS tool can be used to read out an installation made of Easy Hager and Berker devices configured with TXA100 and to take over the configuration with ETS.
Note:
- RF Devices cannot be read out.
- Bus access and ETS products data are required (product database).

The ETS-App Update Copy Convert provides a series of useful functions for the ETS application and device configuration (parameters and group addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

The Weinzierl BAOS CSV Importer is an easy way to export the existing configuration of a generic BAOS database to a CSV file and import it into another project. This eliminates the need for tedious manual configuration. The Weinzierl BAOS CSV Importer is available for all Weinzierl BAOS devices with a generic ETS product database.

This app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

This App is needed for configuration of the Control4 C4-KNX-SUAC Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All SUG/U 1.41 in the project can be processed at the same time. The download into the device is done by normal ETS download.

KNX Virtual is a Windows application representing a KNX installation, i.e. it is not a physical installation but it behaves like one.

The advantage is that no investment in hardware (i.e. KNX power supply, KNX/USB interface or KNX/IP interface, KNX devices) needs to be made in order to test and play with KNX & ETS.

Different version (types) of KNX Virtual exist, each version can be found within one zip file:
1. Switching (including staircase)
2. Switching (including staircase) + feedback
3. Dimming
4. Blinds
5. Heating (RTC)

About ETS:
- Download and install the latest version, no license is required because each KNX Virtual version contains maximum 5 devices (per project).
- Each KNX Virtual indicates the products that are required for the ETS project(s), you can retrieve them via the ETS catalog.

YouTube:
- part1: https://www.youtube.com/watch?v=k8zW0ZZNYA0
- part2: https://www.youtube.com/watch?v=R3FhiI5dTaI

eCampus
For KNX unexperienced users we recommend to follow an online training via our eCampus platform first.

This app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

Device Configuration App (DCA) for Theben DALI-Gateway KNX plus
Order number: 9070929
Application: DALI-Gateway KNX plus (v2.0)
New features:
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

This ETS-APP is a tool that allows updating the operating system of some KNX Zennio devices through ETS without having to send them to the factory.

The OS update does not involve a change of functionality or version of the ETS application program, but updates a lower memory layer.
These updates are usually not necessary throughout the lifetime of the product unless there is a behaviour that cannot be changed with a new version of the application program via ETS.
In case you need to use this APP, our support team will have provided you with the necessary files (.bin).
Download the App manual: https://www.zennio.com/download/manual_fw_updater_en

If you want to update the ETS application program version, you can copy parameters and object links using the Zennio Parameter Copier application, also available in the KNX online shop.

Device Configuration App (DCA) for theben DALI-Gateway S64/S128 KNX
Order number: 4940301, 4940302
Application: DALI-Gateway S64 KNX, DALI-Gateway S128 KNX

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Theben DALI-Gateway S64 KNX, Theben DALI-Gateway S128 KNX
Order no.: 4940301, 4940302
Application: DALI-Gateway S64 KNX V2, DALI-Gateway S128 KNX V2

Device Configuration App (DCA) for the DALI configuration.
The DCA is used for addressing and grouping, as well as creating scenes and timers.
This DCA is compatible with the above application (V2) and devices with firmware 0.3x.

Theben DALI-Gateway P64 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

Blumotix s.r.l.
Device Configuration App (dca) for BX-DALI-PLUS (AV06)
Tilausnumero: BX-DALI-PLUS
Sovellus: BX-DALI-PLUS (AV06)
Device configuration DCA for the dali bus definition. Sovellusta käytetään vain DT6 dali laitteiden määrittämiseen, ensimmäinen numerointi, asennuksen jälkeen, ryhmät ja tilanteet.

Tätä Gira Device Configuration App (DCA) -sovellusta, joka on täysin integroitu ETS-järjestelmään ja täydentää vakioparametrien vuoropuhelua, käytetään Gira DALI Gateway Colour -laitteen (tilausnumero 2111 00, 2112 00) DALI-käyttöönoton ja DALI-testin suorittamiseen. Tämä mahdollistaa DALI-käyttölaitteiden tunnistamisen, osoitteistamisen ja määrityksen tutussa ETS-ympäristössä ilman ETS:n ulkopuolisia lisäohjelmistoja.

Tällä täysin ETS:n integroidulla Device Configuration App (DCA) sovelluksella, joka laajenta vakiopmuotoista parametridialogia, voit suorittaa DALI käyttöönon sekä DALI-testin KNX DALI-2 rajapinnalle. DALI-laitteiden tunnistaminen, osoitteellistaminen ja käyttöönotto voidaan suorittaa tutussa ETS-ympäristössä ilman tarvetta käyttää erillisiä lisäohjelmistoja.

Theben DALI-Gateway P64 KNX
Tilausnumero: 4940303
Sovellus: DALI-Gateway P64 KNX

Device Configuration App (DCA) DALI-käyttöönottoon. DCA:ta käytetään kohdistamiseen ja ryhmittelyyn sekä tilanteiden, ajastimien ja efektien luomiseen.